Package Avs-FirmwaresBundle_24.11.27

• AVBx3 version: 5.007

• Update code with the latest functions to manage the new AxC firmware
• Optimization of start-up time
• Bypass of the old method of reading the serial number when (S/N == 0) or (S/N == 0xFFFF)
• - Allows in supervisor mode to force a new S/N on an old firmware core without S/N
• Resolve ASRC management on AVBx3 without matrix
• - AxC-ADSP should be in slot 2 when in ASRC mode
• Fix the change to a new clock source that is not locked
• The lock status of a card with multi sources only reflect the current source...

• AiC-xCore version: 2.047

• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers

• AVBx7 version: 3.006

• Last changes since version 3.004
• - Modification of RAM block allocation to double the size of AxC_MEM
• - Increased automation to handle 31 triggers
• - Optimized MDC Ethernet access

• AxC-GPIO-Wclk version: 2.000

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold

• ALP-AES67-A7 versions: 1.130 / 1.052

• New kernel 1.6.4
• Add IT Watchdog .
• Fix AES67 Internal routing management.

• ALP-DANTE-A7 versions: 1.130 / 10.080

• Add support of AES67 in DDM.
• Fix Unlock flash by key (BrknII).
• Add Firmware update state .
• Fix FPPR NOP.

• AVDT-BOB-AE4IO versions: 3.021 / 1.005

• Fix disconnection with several web BOB page open
• New gain management db R68-2000 / dBu / dB legacy

• AVW-DT4I versions: 2.112 / 5.006

• Fix: ADC init based on register detection.
• New: Add internal IHM register in AxC-Mem Err&Tst page.
• New: Disable LED dimmer mode in active mode.
• New: Allow Bluetooth activation with long push on the button.
• Fix: Bluetooth disconnection status was not working in some very case.

• AxC-ADSP versions: 2.011 / 2.016

• New: Support UPI8 protocol.
• New: New mailbox protocol acess and exteneded mailbox to 8 page buffer.
• Fix: New IP stack version. Improvement of connection reliabilty.
• Fix: new save, load internal mechanism.
• Fix: Dynamic pagination of AxC-Mem of LPC from FPGA.
• Fix: Update webservice: fix scene display of ADSP.
• Fix: Channel label load / saved correctly.
• Change the Vumeter lower limit from -48dB to -72dB

• AxC-AES67-A7 versions: 1.020 / 1.036

• Fix internal IT management to avoid flooding on burst write
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Change some internal I/O number registers to read-only
• Added audio router management with default initialization.
• Correction of channel <=> router <=> application naming
• Added blocking of sample rate configuration from the web interface.
• Change the Vumeter lower limit from -48dB to -72dB

• AxC-AT32IO version: 4.015

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-AVB versions: 2.099 / 2.039 / 8.072

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-AE8M version: 2.023

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-AS16MO-V2 version: 1.018

• Change the In/Out/Global mute behaviour to ensure signal is still routed to vumeter when device muted

• AxC-AX4M version: 4.025

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-AX4I version: 7.023

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-CN32IO version: 2.020

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-DANTE versions: 2.056 / 10.062

• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Change the Brooklyn reset system to avoid some blocking issues
• Add remote NXAMP device monitoring ( Brooklyn3 )
• Fix abusive lock
• Change the Vumeter lower limit from -48dB to -72dB

• AxC-DANTE-A7 versions: 1.015 / 10.062

• Bug fix on HA-Remote configuration mode issues (internal Brooklyn reset management).
• Extension of CSPR pages number.
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Add remote NXAMP device monitoring ( Brooklyn3 )
• Fix Factory Reset
• Fix abusive lock
• Change the Vumeter lower limit from -48dB to -72dB

• AxC-DX8I version: 6.030

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load

• AxC-ES100 version: 27.012

• Bug fix on PID that could disable the ASIO capability

• AxC-GPIO16 version: 2.002

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold
• Provides relay activation status for GPOs

• AxC-MADI versions: 12.019 / 1.038

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Change the Vumeter lower limit from -48dB to -72dB

• AxC-MADI_SFP versions: 12.019 / 1.038

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Change the Vumeter lower limit from -48dB to -72dB

• AxC-SWD5G version: 1.010