Package Avs-FirmwaresBundle_22.03.22

• AVBx3 version: 5.003

• Update code with the latest functions to manage the new AxC firmware
• Optimization of start-up time
• Bypass of the old method of reading the serial number when (S/N == 0) or (S/N == 0xFFFF)
• -> Allows in supervisor mode to force a new S/N on an old firmware core without S/N

• AiC-xCore version: 2.039

• Improvements on the absolute value (ppm) of the local audio clock.
• Hardware compatibility with an alternative PLL chip reference (CS2000)
• New VuMeters managment for performance improvments for remote clients
• New Mute function per Slot for Automation

• AVBx7 version: 2.072

• Last modifications since version 2.045
• - Added a mechanism to compute the audio clock offset from the built-in system clock oscillator
• - Added new FPPR command function to get/set IP/MASK/GW/DNS.
• - Added new Silab frequency tables which can be computed dynamically
• - Added internal computation of Silab frequency parameters
• - Measurement of the frequency differences between the FPGA oscillator and the XTAL of the Silab to compensate the XTAL frequency offset.
• - Integration of LWIP 2.13
• - First version of remote exchange management between AVBx3M and AVBx7 DMA automation actions (i.e. when IP != 0)
• - Optimization of the tables for the calculation of the frequency compensation
• - Fixed a bug on remote DMA automation actions
• - Added common DMA functions and structures used by both M0 and M4 in AxC-Core_X_ShareLib
• - Optimization on the management of clock changes
• - Added CS2100 functions and code (i.e. since this version, CoreX can work with CS2100 or Silab)
• - Requires specific Xilinx Core version >= 2.031 for using cards with CS2100 PLL
• - Added new AxC_Mem registers in Xilinx for CS2100 vs Silab chip configuration/management
• - Added automation functions to patch or cut directly from one slot to another
• - Added frequency calibration mechanism for both Silab/CS2100 PLL based on oscillator and XTAL
• - Increased AxC_Mem size and changed load/save mechanism for future page growth
• - Added 32 name pages and 8 application pages
• - Fixed wrong offset calculation in DMA Automation on CoreX (slot14, 15)
• - Changed auto patch and removed all unnecessary dynamic changes from IOMR.. BCER to avoid issues when loading old config with wrong values
• - Bug fix to correctly handle the ADSP map in ASCR mode (i.e. to avoid patching it)
• - Force BCER, IOMR periodically on each slot (one slot every 1s) to avoid issues with old firmware (i.e. card not updated or not factory reset)
• - Optimizations to speed up the main loop (reduction of access to i2c components)
• - Bug fix on the numbers of I/O of ADSP cards in ASRC mode (dynamically propagate the numbers of I/O of the card that follows i.e. in ASRC)
• - Bug fix on name pages for Automation
• - Add new FPPR function in Core for checking the id and an alive status of a sub-cpu of an AxC-Card
• - Add new functions in CoreX Automation to Patch, Mute, UnMute, Disable channels in Matrix and to change the source clock

• AxC-GPIO-Wclk version: 2.000

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold

• AVDT-BOB-AE4IO versions: 3.008 / 1.003

• Handle AVDT-AMP device
• Fix: New Ethernet / IP stack handling
• Fix: Apply user daughter board setting at boot time.
• New Ultimo firmware

• AVW-DT4I versions: 2.029 / 5.003

• Fix Bluetooth name issue.

• AVW-DT4O versions: 2.010 / 1.001

• Add advanced channel group management mode
• Add gain limitation option

• AxC-ADSP versions: 2.003 / 1.044

• Update web service.
• Fixed Backup & restor functions.
• Improved reliability on the internal audio bus. Improved reliability on the internal data bus.
• New filters : allpass first and second order,, notch, high shelf, low shelf, bandpass.
• Add phase plot.
• Improvement GUI mixer scrolling.

• AxC-AT32IO version: 4.009

• New flash driver for improved update speed and security
• New backplane audio bus for improved reliability

• AxC-AVB versions: 2.076 / 2.019 / 6.084

• Bug fix on audio clocks in an ASRC scenario, which corrupted normal audio behaviour.
• Bug fix on audio clocks in an ASRC Redundant scenario.
• Bug fix on Vumeters display with respect to Sample Rate.

• AxC-AE8M version: 2.016

• Version compliant with AS16mo model "Mother In / Daughter Out" with dedicated Product ID

• AxC-AX4M version: 4.016

• New flash driver for improved update speed and security
• New backplane audio bus for improved reliability

• AxC-AX4I version: 7.016

• Bug fix on front panel LEDs that were not working anymore
• Input Pad are now managed digitally

• AxC-CN32IO version: 2.006

• AxC-DANTE versions: 2.038 / 10.018

• Fix notify
• New Audinate kernel - BBE 4.2.6.2 (Dante version 4.2.3.13 / Dante API 4.4.0.8 )

• AxC-DX8I version: 6.022

• Add AES42 control

• AxC-ES100 version: 27.009

• Bug fix on internal clock that leads to slave synchronization issues.

• AxC-GPIO16 version: 2.002

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold
• Provides relay activation status for GPOs

• AxC-MADI versions: 11.027 / 1.020

• New flash driver for improved update speed and security
• New backplane audio bus for improved reliability

• AxC-MADI_SFP versions: 11.027 / 1.020

• New flash driver for improved update speed and security
• New backplane audio bus for improved reliability

• AxC-SWD5G version: 1.010